Manual stone cutting machine AFR-C
Bridge saw with fixed bridge and manual head feed
Compact, essential and sturdy saw with fixed bridge and manual head feed for marble and granite slabs; the bridge tilts and the water tank with built-in recycling pump makes it the perfect for small and large stone fabricating shops. It is equipped with 1 or 2 side extension tables to enlarge the working surface and facilitate the positioning of the slabs.
Fully equipped and manual bench saw with fixed bridge AFR-C for cutting stone slabs:
- Available with several useful cutting versions, according to customer requirements;
- Maximum cutting precision guaranteed by a special beam design;
- Sturdy and compact structure to work any kinds of slabs;
- Manual head feed by hand crank.
| AFR-C | AFR-C HT | |
| Useful cut |
1500–2000-2500–3000–3300-3500 mm (4’11” – 6’6” – 8’2” – 9’10” – 10’10” – 11”5’) |
1500–2000-2500–3000–3300-3500 mm (4’11” – 6’6” – 8’2” – 9’10” – 10’10” – 11”5’) |
| Diamond blade diameter | 250-300-350 mm (10”–12”–14”) | 400-450-500 mm (16”–18”–20”) |
| Blade bore size | 25.4 mm (1") | 25.4 mm (1") |
| Motor power |
3kW = 4HP (3ph.) |
4kW = 5.5HP (3ph.) |
| Motor rotation speed | 2800 rpm a 50Hz – 3400 rpm a 60Hz | 1400 rpm a 50Hz – 1700 rpm a 60Hz |
| Standard voltage/ frequency |
400V-50/60Hz /230V-60Hz 3ph. |
400V-50/60Hz /230V-60Hz 3ph. |
Rubber covering on the worktop
Non-slip rubber covering for the worktable surface, ideal for ceramic slabs.
Laser
Laser alignment device mounted on the head shows the blade’s cutting line, battery feed 1,5V.
Side tables with rollers
Side extension table equipped with rollers to facilitate slab movement. Dimensions: 1000 x 458 mm
Device for parallel cuts
Machine can be equipped with a special device that, controlling the movement of the side stop, facilitates the execution of parallel cuts. The side stop runs parallel to the cutting line by means of a special hand wheel.
HT version
Highest and robust increased version with blade guard for disc Ø 400-500mm and 3phase motor, 4kW (5,5HP)
Adjustable angle square
Adjustable angle square for maximum cutting precision, length 600mm.
Galvanized water tank
Galvanized and painted water tank, for the maximum rust resistance.
Side tables
Side tables with side stop for easy slab cutting.
Locking device for thin pieces
The device is composed of stops to be fixed manually to lock the piece during processing. The device can be fixed on the standard side stop of the machine.
Do you need information about Achilli products? Contact us for technical or commercial information on floor grinders, bench saws and bridge saws.
Guarantee 12 months
Qualified technical support
Training with Achilli technicians
Spare parts always available
Product: Manual stone cutting machine AFR-C