Compact, essential and sturdy granite cutting saw with fixed bridge for stone slabs, marble and granite; the bridge tilt and the water tank with built-in recycling pump make it the perfect saw for the stone fabbricator.
Manual bridge tilt for cutting from 90 to 45 degrees.
Manual head feed, useful cut: 800, 1000, 1300 mm.
Worktable made of steel rails with epoxy powder finish, built-in handle and adjustable squaring bar.
Water tank with built-in recycling pump for disc cooling.
Manual cutting depth adjustment by hand wheel.
Equipped with nr. 1 or 2 side extension tables.
AFR-M is a reliable portable granite cutting saw with fixed bridge to cut slabs up to 1300mm in length:
|Useful cut||800-1000-1300 mm||800-1000-1300 mm|
|Diamond blade diameter||250-300-350 mm||400-450-500 mm|
|Blade bore size||25,4 mm||25,4 mm|
2.2kW = 3HP 1ph. / 3Kw = 4HP 3ph.
|4kW= 5.5HP 3ph.|
|Motor rotation speed||2800rpm 50Hz – 3400rpm 60Hz||1400rpm a 50Hz – 1700rpm a 60Hz|
|Standard voltage/ frequency||
230V-50/60Hz / 400V-50/60Hz
Laser alignment device mounted on the head shows the blade’s cutting line, battery feed 1,5V.
Side extension table equipped with rollers to facilitate slab movement. Dimensions: 1000 x 458 mm
Highest and robust increased version with blade guard for disc Ø 400-500mm and 3phase motor, 4kW (5,5HP)
Galvanized and painted water tank, for the maximum rust resistance.
Optional side table for easy slab moving during processing. Dimensions: 500x430mm
Do you need information about Achilli products? Contact us for technical or commercial information on floor grinders, bench saws and bridge saws.
Guarantee 12 months
Qualified technical support
Training with Achilli technicians
Spare parts always available
Product: Saw with manual head feed AFR-M