Multipurpose machine MAS

Cutting, edge profiling, polishing and chamfering machine

Multipurpose machine MAS

MAS is a fully equipped multipurpose machine which can be used for cutting, edge profiling, polishing and chamfering straight edges by simply changing the head tool.

 
Request Information
Tailored Achilli machines
Contact us for details

Request customization
Structure

Structure

Steel frame, sandblasted and ceramic coated (hot-dip galvanized upon request).

Control panel

Control panel

Mobile control panel: includes the following controls:

- Main motor start/stop button

- Head forward, stop and reverse button

- Head forward and reverse variable speed controls

- Main motor raise and lower button

- Emergency stop push button

Head motion

Head motion

Motorized head travel with variable speed on x and z axis in both directions. Three different head feed modes: forward only, forward and reverse (single cycle), forward and reverse continuously.

2-speed main motor for marble and granite.

Head tilt

Head tilt

Manual head tilt from 90 to 45 degrees for cutting or chamfering and to 0 degree for edge profiling and polishing.

Worktable

Worktable

Worktable made of galvanized steel rails.

Cutting depth adjustment

Cutting depth adjustment

Motorized working depth adjustment along Z axis by geared motor.

Extensions and side stop included

Extensions and side stop included

The worktable is equipped with no. 6 worktable extensions and side stop for easily move also big slabs.

Advantages

MAS is a multipurpose saw for cutting stone slabs as well as profiling, polishing and chamfering straight edges:

  • Multipurpose machine fully customizable according to customer requirements;
  • The atmost precision is guaranteed by a compressed, rectified and chromed “active beam”;
  • Motorized head travel with variable speed on X and Z-axis in both forward and backward directions; 
  • 2-speed main motor to optimize machining of all types of stone: for marble (7.5kW=10HP) and for granite (5.5kW=7.5HP).
Technical details
X axis travel 3100 mm
Z axis travel 240 mm
Diamond blade diameter 400 mm
Blade bore size 50 mm
Profiling wheels

Bore size 35mm – lower diameter 60mm 

Main motor power

5.5/7.5kW - 7.5/10HP (3ph.)

Main motor rotation speed  1400 rpm 50Hz – 1700 rpm 60Hz
Standard voltage-frequency

400V-50/60Hz  /

230V-60Hz  3ph.

 

Accessories
Device for parallel cuts

Device for parallel cuts

Machine can be equipped with a special device that, controlling the movement of the side stop, facilitates the execution of parallel cuts. The side stop runs parallel to the cutting line by means of a special hand wheel.

Flat edge polishing kit

Flat edge polishing kit

Head tilt from 90° to 0° for working the edge of slabs up to 60 mm in thickness.

Main motor slide for working of slab edge.

Tools technical features: Wheels 130mm diameter with left handed snail lock. 

Chamfering kit

Chamfering kit

Head tilt from 90° to 0° for working the edge of slabs up to 60 mm in thickness.

Main motor slide for working of slab edge.

Tools technical features: Wheels 130mm diameter with left handed snail lock. 

Profiling kit

Profiling kit

Head tilt from 90° to 0° for working the edge of slabs up to 60 mm in thickness.

Main motor slide for working of slab edge.

Tools technical features: Diamond profiling and edge polishing wheels with 60mm lower diameter (bore 7/8') or 150mm (bore 35-30-22,2mm) for marble and granite slabs up to 60 mm in thickness. 

Worktable with pop-up rollers

Worktable with pop-up rollers

Pop-up rollers manual or motorized to facilitate slab loading and positioning: roller table with omni-directional rollers.

Side extension tables with rollers

Side extension tables with rollers

Side extension tables equipped with rollers to facilitate slab movement. Dimensions: 1510x865 mm

Laser

Laser

Laser alignment device mounted on the head shows the blade’s cutting line.

Water tank

Water tank

Water tank with built in recycling pump for disc cooling during processing.

See all products
Request Information

Do you need information about Achilli products? Contact us for technical or commercial information on floor grinders, bench saws and bridge saws.

Request Information
Share your choice

Share on your social profiles the product you chose for your work.

0541 387066 info@achilli.com Technical support Request customization Data sheet Request Information

Product: Multipurpose machine MAS